Mikasa Rammer Bellows Boot for MTX70, MTX80 & MTX90 — Replaces 354010010

Replace the torn or worn orange boot around your Mikasa rammer’s lower guide cylinder. This aftermarket bellows flexes with the rammer’s stroke and helps keep dirt and debris away from the moving assembly.

Quick fitment check
Find the full model and serial number on your rammer’s ID plate. Open the parts diagram for that machine and look for 354010010 in the guide cylinder assembly. Use the part number to confirm the match, especially if you’re replacing a boot on an older MT-series rammer.

Model fitment

The parts manuals for these models specify Multiquip bellows 354010010.

Only see “MT74” or “MT75” on the decal? Check the ID plate for the complete model. If you’re unsure, send us a photo of the plate and we’ll help you identify the bellows called out in your diagram.

Check the clamps while you have the boot off

Inspect the upper and lower clamps and guide bands before reassembly. On the MTX70HD, MTX70HDR, and MTX80HDR, the diagrams call out bellows clamp 354336352 and guide band 354442340 separately. For older MT-series machines, check the hardware numbers in your own diagram.

Frequently asked questions

What’s the difference between 354010010AF and 354010010?
354010010AF is the Zing Parts SKU for this aftermarket bellows. 354010010 is the original Multiquip part number you’ll find in the parts manual.

Can I match the boot by color or by the shape of the ribs?
Use the part number first. If you’re comparing the old boot with the photos, look at both mounting openings and where the clamps sit.

Does it fit the MTX70HD and MTX70HDR?
Both Multiquip diagrams show 354010010 as item 23. Check the full model and serial number on your machine before ordering.